This command will take a while, and once it finishes, you can safely eject the drive through Finder and you should be able to boot from it to install Windows 10 on a PC. If I mouse over it, it reads: 'Disks with Master Boot Record Partition Maps cannot be partitioned'. When I opened the Windows 10 Fall Creators Update ISO, it mounted as a volume named CCCOMA_X64FRE_EN-US_DV9, so I used the following command to copy its contents to the USB drive:Ĭp -rp /Volumes/CCCOMA_X64FRE_EN-US_DV9/* /Volumes/WINDOWS10/ Within disk utility, the partition icon is grayed out. Erase boot sector with zeros (make sure you won't erase the wrong drive): sudo dd if/dev/zero of/dev/diskN bs1024 count1024. Unmount the drive (replace diskN with your drive): diskutil unmountDisk force diskN. Eventually I found that using cp from the command-line did work without any issues. Try to format your disk from the Terminal using diskutil command, for example: List all drives: diskutil list. Oddly enough, copying the files through Finder did not work for me - I received an error about the files being too large, even though the partition on the drive was definitely big enough, and no individual file appeared to be too large for the FAT32 file system. Now you can mount the Windows 10 ISO by opening it through Finder and copy its contents to the USB drive. Next, the following command can be used to format the drive (replace disk# with the actual identifier for your USB drive) and mount it as a volume named WINDOWS10:ĭiskutil eraseDisk MS-DOS "WINDOWS10" MBR disk# First, run diskutil list and find the identifier of the USB drive (this will be something like disk2 or disk3 make sure you find the right one, since you could erase the wrong drive and lose data if you don’t use the correct identifier). After some research and a lot of trial and error, I found that the USB drive must be formatted with a FAT32 partition and the MBR partitioning scheme, after which you can simply mount the Windows 10 ISO in macOS and copy the files to the drive.įormatting the USB drive can be done from the command-line fairly easily. My first instinct was to use dd to copy the ISO to the USB drive (as one typically does when installing a Linux distribution, for example), but it turns out that this does not satisfy the UEFI boot process. Microsoft provides a tool for creating a bootable Windows 10 installation drive from an existing Windows system, but not for macOS, and there is some conflicting information online about how to go about doing that. This was my first time installing Windows 10, and it turned out to be a bit of a challenge, as I opted to purchase a downloadable copy through Microsoft’s website and transfer it to a USB drive on my Mac running macOS High Sierra. After going inside the Utility folder, twice click on the ‘Disk Utility. To create a new partition map via disk utility, follow these on-screen step by step instructions given below: Go to the primary dashboard of the macOS and launch the Finder application, then access your Utility folder. I recently put together a new gaming PC for the first time in several years. Create a New Partition Map through Disk Utility.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |